Views: 0 Author: Site Editor Publish Time: 2023-07-21 Origin: Site
The bucket teeth of the excavator are the terminal equipment of the working equipment of the excavator. During the excavation process, the bucket teeth are the working components with heavy loads and belong to consumable parts.
Especially in the earthwork construction environment, the bucket teeth wear very fast. The use of bucket teeth is good or bad, in fact, it can directly affect the working efficiency and production cost of the excavator.
When the top part of the bucket teeth is severely worn, the excavator must greatly increase the selection range required for excavation work, resulting in greater fuel consumption and affecting work efficiency. Therefore, it is very necessary to replace the new bucket teeth in time when it is found that the bucket teeth are seriously worn.
So it is necessary to spend 2 minutes every day to check the bucket.
HXMD recommends:
What should be checked is
The bucket body is worn and whether there are cracks. If the wear is serious, structural reinforcement should be considered. If there is a crack in the bucket body, it should be welded and repaired in time, so as not to increase the length of the crack due to delayed maintenance, resulting in the situation that cannot be maintained.
