What is a Forging Bucket Teeth?

When purchasing bucket teeth for excavator, the first thing to look at is the working environment it uses, in order to determine what type of bucket teeth are needed. At the same time, we also want to know the correct maintenance method of excavator bucket teeth.

• What is a forged bucket tooth?

• How to maintain bucket teeth?

• conclusion

What is a forged bucket tooth?

1. forging bucket teeth as a new technology, after years of research and experiment, until today is mature. At present, there are about 20 mature forgings manufacturers in China, and gold forging is one of them.

2. The forging bucket teeth exert pressure on the heated billet between the forging dies at high temperatures so that the material is fully filled with the forging die during the manufacturing process to obtain the desired shape.

3. The cast bucket teeth have the following advantages: the cast bucket teeth are more solid and reliable and better impact and wear resistance. More suitable for a variety of environments and applications, forging bucket teeth delivery time within 7 days.

How to maintain bucket teeth?

1. Choose the right bucket teeth: In the process of using the excavator bucket teeth, the wear speed of the outside teeth of the bucket is 30% faster than the inside teeth. The inner and outer teeth can be replaced after a period of use to maintain the same degree of wear.

2. Timely replacement of bucket teeth: when the tooth tip is seriously worn, the force required by the excavator will increase, which means the need for greater fuel consumption, affecting the work efficiency. Therefore, when the bucket teeth wear is serious, it is very necessary to replace the new excavator teeth in time.

3. Timely replacement of barrel joints: Excavator drivers should pay attention to the excavation Angle operation when excavating, to avoid breaking bucket teeth due to excessive inclination. It is recommended to replace the tooth base after the tooth base wear 10%-15%, because there is a large gap between the two worn teeth and the bucket teeth, so that the bucket teeth and the tooth base appear matching points and stress points. When the change, the bucket tooth fracture due to the change of the force point.

4. Daily inspection and tightening: In the daily maintenance work of the excavator, spend a few minutes every day to check the bucket. The main check contents are as follows: Check the bucket body: serious wear should be considered reinforcement. The wear degree of the bucket body and whether there are cracks. If there is a crack in the bucket body, it should be welded and repaired in time. In addition, check whether the bucket teeth are stable. If the tooth is loose, tighten it immediately.

Conclusion：

As professional Ground Engaging Tools supplier, Gold Forging insist on provide best service and products to us client, not only offer like cutting edges, motor grader balde, but also excavator buckets, tooth pin and series products.

Welcome to visit our products list: https://www.goldforging.com/products find what your needs.